Rolux X-series Reel Mower
To download our manual please click the below button for further assistance, refer to the user manual by clicking the button below.
Rolux X Series Reel Mower
Browse our YouTube channel by clicking the link below. Explore our collection of informative videos on our YouTube channel.
Troubleshooting
My mower leaves a ragged finish
- Cause: Reel not correctly adjusted.
- Remedy: Adjust the reel
- Cause: Cutting blades blunt
- Remedy: Sharpen blades
My engine will not start
- Cause: Engine may be flooded
- Remedy: Leave for 10—15 minutes to allow the excess fuel to evaporate and try again.
- Cause: Spark plug lead not connected
- Remedy: Reconnect
- Cause: No oil
- Remedy: Add sufficient oil
My reel does not rotate
- Cause: Incorrect adjustment – Reel set too tight against the bedknife
- Remedy: Adjust the reel as outlined above.
Drum (rear rollers) does not engage
- Cause: Incorrect adjustment of the clutch cable
- Remedy: Increase tension of clutch cable by adjusting/tightening the nuts.
Reel cuts higher on the one side and lower at the other side
- Cause: The alignment of the front roller is not parallel to the bedknife holder/mount.
- Remedy: Adjust the front roller so it sits correctly in the bracket, ensuring that it is parallel to the bedknife holder/mount.
Poor collection of grass
- Cause: Mowing in wet conditions
- Remedy: Allow lawn to dry sufficiently before continuing to mow.
- Cause: Deflector plate too high, throwing grass over
the grass catcher. - Remedy: Adjust deflector plate to top setting
Excessive vibration / noise
- Cause: Blade(s) or/and reel bearing damaged or coupling unbalanced
- Remedy: Contact your local dealer
Join Our Community
Join the Rolux community Stay updated on the latest products and trends by becoming a member of our Rolux group on Facebook.